TDTailgateDocs

Free construction safety tools

These 20 free construction safety tools need no login: a WBGT calculator and a heat rule checker for hot days, fire extinguisher, ladder and forklift inspection checklists, a hot work permit, a PPE hazard assessment and a sign-in sheet, ladder angle and fall clearance calculators, a construction safety quiz, a forklift capacity calculator, an OSHA 300A summary builder, TRIR, DART, EMR and OSHA penalty calculators, a recordable injury check, and a quiz on which documents your state requires. Nothing you type leaves your browser.

Inspections and forms

Fire extinguisher inspection checklist

Tick the monthly checks for each extinguisher and print a 12-month inspection log.

Ladder inspection checklist

Check a stepladder, extension or fixed ladder against OSHA and print the record.

Forklift inspection checklist

Run the OSHA daily check for a gas, LPG, diesel or electric forklift and print the record.

Hot work permit

Answer the OSHA fire rules for welding and cutting, set the fire watch and print a permit to sign.

PPE hazard assessment

Build the written PPE hazard assessment certification OSHA 1910.132(d) requires, ready to print.

Toolbox talk sign-in sheet

Make a printable toolbox talk or safety meeting sign-in sheet in seconds.

Heat

WBGT calculator

Turn wet bulb, globe and dry bulb readings into WBGT and compare it with the NIOSH limits.

Heat rule checker

Enter your state and the temperature to see whether your heat illness rule applies today.

Ladders and fall protection

Ladder angle calculator

Set an extension ladder at the correct angle with the OSHA 4-to-1 rule.

Fall clearance calculator

Calculate the clearance a personal fall arrest system needs below the working surface.

Training and equipment

Safety quiz

Take a 20-question construction safety quiz with the OSHA rule for every answer, or print it with a key and sign-off sheet.

Forklift capacity calculator

Estimate a forklift's reduced capacity when the load center is longer than the one on its data plate.

Incident rates and records

TRIR calculator

Calculate your TRIR, DART, and LTIFR from your OSHA 300A numbers and see how it compares.

OSHA incident rate calculator

Get all three OSHA rates from your 300A numbers at once: TRIR, DART, and LTIFR.

DART rate calculator

Calculate your DART rate from your OSHA 300 log and see how it compares to the construction average.

EMR calculator

See what your workers comp experience mod is costing you and what lowering it would save.

OSHA 300A

Add up your OSHA 300 Log and print the annual 300A summary to certify and post by February 1.

Is it OSHA recordable?

Walk the OSHA 1904 criteria to find out if an injury is recordable and which forms to file.

OSHA penalty calculator

See the 2025 fine amounts by violation type and estimate your exposure.

Planning

State safety requirements quiz

Answer five questions and get the exact list of safety documents your state and clients require.

Need the documents, not just the tools?

We generate site-specific safety plans, written safety programs, JHAs, heat plans, and California IIPP and workplace violence plans for your trade in under 30 minutes, with every citation checked against a regulations table.