Written Safety Program for HVAC / Mechanical Contractors
The company-wide safety manual prequal portals ask you to upload. Generated for hvac / mechanical contractors in under 30 minutes, every citation checked against our 29 CFR standards table, $149 flat.
1,200+ documents generated · 350+ contractors served · Spanish version +$19
When you need this document
ISNetworld, Avetta, Veriforce, or a client prequalification is requiring an uploaded written safety program, or your insurer wants one on file.
A written safety program is the document prequal reviewers and insurers grade you on. Unlike a plan for one job, it has to prove your company has standing policies, assigned responsibilities, and hazard-specific procedures for your trade that apply on every site. This is the file a portal like ISNetworld scores and an insurance carrier keeps on record.
What's inside
- ✓ Safety policy statement and management commitment
- ✓ Assignment of responsibilities and competent persons
- ✓ Hazard identification and control procedures
- ✓ Trade-specific safety programs citing 29 CFR standards
- ✓ Training and toolbox talk program
- ✓ PPE, emergency, and incident investigation procedures
- ✓ Recordkeeping and OSHA 300 procedures
- ✓ Annual review and signature page
Written for hvac / mechanical work, not a template
Every written safety program we build for hvac / mechanical contractors is written around the hazards hvac / mechanical crews actually face: rooftop work, brazing / hot work, refrigerant handling, confined spaces, electrical lockout. Here is the substance that goes into it.
Real hvac / mechanical jobs where a Safety Program matters
- ▸Setting and connecting a rooftop packaged unit at a low-slope roof edge, where the crew works within a few feet of an unprotected edge to braze line sets and land power.
- ▸Brazing refrigerant lines in an occupied mechanical room, running an open flame near stored combustibles with limited ventilation.
- ▸Entering an attic, plenum, or crawl space to service ductwork, a space that can be permit-required for its heat, limited egress, and possible atmospheres.
OSHA standards on the HVAC / Mechanical focus list
The Safety Program is generated against these real 29 CFR sections for hvac / mechanical work, and every citation is validated against a verified standards table before delivery:
- §TASK CLASSIFICATION RULE (state it in the document and route every citation by it): CONSTRUCTION work - new installation, alteration, repair/replacement projects - is governed by Part 1926; routine SERVICE and MAINTENANCE of existing equipment is GENERAL INDUSTRY, governed by Part 1910. Never route all work to Part 1926 by default.
- §29 CFR 1926.416-417: electrical safety on CONSTRUCTION work; for routine service/maintenance, electrical safety-related work practices are 29 CFR 1910.333 (deenergize live parts before work unless infeasible, with lockout/tagging per 1910.333(b)) and hazardous-energy control for non-electrical energy is 29 CFR 1910.147
- §29 CFR 1910.146: permit-required confined spaces for SERVICE/MAINTENANCE entries (attics, plenums, crawl spaces during service calls); 29 CFR 1926 Subpart AA (1926.1201-1213) applies to those spaces only during CONSTRUCTION activities
- §29 CFR 1926.350: gas welding and cutting (fuel-gas and oxygen cylinders for brazing)
- §29 CFR 1926.352: fire prevention during welding, cutting, and heating
- §29 CFR 1926.501: fall protection (rooftop units)
- §29 CFR 1926.1053: ladders
- §29 CFR 1926 Subpart AA (1926.1201-1213): confined spaces (attics, crawl spaces, plenums)
- §29 CFR 1910.1200: hazard communication (refrigerants, solvents)
- §29 CFR 1926.95: PPE
What hvac / mechanical crews get cited for
The plan is written to close out the issues that draw citations in hvac / mechanical work:
- ⚠Lockout and tagging of circuits (29 CFR 1926.417): servicing a rooftop unit or air handler without locking out the disconnect first.
- ⚠Fall protection (29 CFR 1926.501): working rooftop equipment inside 6 feet of an unprotected edge with no guardrail, warning line, or personal fall arrest.
- ⚠Confined spaces (29 CFR 1926 Subpart AA): entering attics, plenums, or crawl spaces without atmospheric testing or a permit-space program.
What a written safety program costs everywhere else
Same document, three very different price tags and wait times.
| Safety consultant | Template sellers | TailgateDocs | |
|---|---|---|---|
| Price | $500 to $2500 | $99 to $500 | $49 |
| Turnaround | 1 to 2 weeks | hours of DIY editing | Under 30 minutes |
| Site-specific to your project | Yes | No, you fill in blanks | Yes |
| Real 29 CFR citations | Yes | Sometimes outdated | Yes, verified against 140+ sections |
| Spanish version for your crew | Rarely | Almost never | Yes, +$19 |
| Revisions when the GC asks | Billed hourly | You edit it yourself | Free within 24h |
Common questions
▸How fast can I get a written safety program?
Under 30 minutes after you finish the questionnaire, and usually well inside that. It downloads in the browser and a copy lands in your email. If a document needs an extra compliance check it comes by email instead, and we tell you.
▸Does it cover the OSHA standards for hvac / mechanical work?
Yes. HVAC / Mechanical documents are generated against a curated focus list including TASK CLASSIFICATION RULE (state it in the document and route every citation by it), 1926.416-417, 1910.146 and more, and every citation is validated against a verified standards table before delivery.
▸What if the GC or prequal reviewer asks for changes?
Reply to your delivery email and we revise the document free, within 24 hours and as many times as it takes, until your GC or prequal reviewer accepts it.
Written Safety Program for other trades
RoofingElectricalGeneral ContractorLandscapingPlumbingConcrete / Masonry
Other documents
Site-Specific Safety Plan for HVAC / Mechanical ($49)Job Hazard Analysis for HVAC / Mechanical ($29)Heat Illness Prevention Plan for HVAC / Mechanical ($49)California Workplace Violence Prevention Plan for HVAC / Mechanical ($59)Sample documents
Free toolbox talks for your crew
Noise and Hearing ProtectionBack Safety and Manual LiftingCompressed Gas Cylinder SafetyRespirator BasicsAll talks (EN/ES)