Written Safety Program for Electrical Contractors
The company-wide safety manual prequal portals ask you to upload. Generated for electrical contractors in under 30 minutes, every citation checked against our 29 CFR standards table, $149 flat.
1,200+ documents generated · 350+ contractors served · Spanish version +$19
When you need this document
ISNetworld, Avetta, Veriforce, or a client prequalification is requiring an uploaded written safety program, or your insurer wants one on file.
A written safety program is the document prequal reviewers and insurers grade you on. Unlike a plan for one job, it has to prove your company has standing policies, assigned responsibilities, and hazard-specific procedures for your trade that apply on every site. This is the file a portal like ISNetworld scores and an insurance carrier keeps on record.
What's inside
- ✓ Safety policy statement and management commitment
- ✓ Assignment of responsibilities and competent persons
- ✓ Hazard identification and control procedures
- ✓ Trade-specific safety programs citing 29 CFR standards
- ✓ Training and toolbox talk program
- ✓ PPE, emergency, and incident investigation procedures
- ✓ Recordkeeping and OSHA 300 procedures
- ✓ Annual review and signature page
Written for electrical work, not a template
Every written safety program we build for electrical contractors is written around the hazards electrical crews actually face: electric shock / arc flash, energized circuits, work at heights, ladder use, confined electrical rooms. Here is the substance that goes into it.
Real electrical jobs where a Safety Program matters
- ▸Rough-in wiring a new commercial build where temporary power, other trades' cords, and standing water share the same slab, and GFCI protection is the only thing between the crew and a ground fault.
- ▸Replacing a panel or running a live troubleshooting call where the circuit cannot be fully de-energized, so the work needs an energized-work justification and arc-rated PPE.
- ▸Pulling conductors from a fiberglass ladder next to an energized bus while another electrician racks a breaker.
OSHA standards on the Electrical focus list
The Safety Program is generated against these real 29 CFR sections for electrical work, and every citation is validated against a verified standards table before delivery:
- §29 CFR 1926.404(b): ground-fault protection (GFCI)
- §29 CFR 1926.405: wiring methods and equipment
- §29 CFR 1926.416: general electrical safety requirements
- §29 CFR 1926.417: lockout and tagging of circuits
- §29 CFR 1926.95: general PPE requirements
- §29 CFR 1926.97: electrical protective equipment (insulating gloves, sleeves, and blankets, including the retest intervals in Table E-5)
- §29 CFR 1926.1053: ladders (non-conductive near energized parts)
- §29 CFR 1926.501: fall protection at 6 ft or above
- §29 CFR 1910.1200: hazard communication
What electrical crews get cited for
The plan is written to close out the issues that draw citations in electrical work:
- ⚠Ground-fault protection (29 CFR 1926.404(b)): missing or untested GFCI on temporary power and construction receptacles.
- ⚠Lockout and tagging of circuits (29 CFR 1926.417): starting work on equipment that was never locked and tagged in a de-energized state, or no group lockout on a shared circuit.
- ⚠Electrical protective equipment (29 CFR 1926.97): crews without arc-rated clothing, insulated gloves, or voltage-rated tools for energized work.
What a written safety program costs everywhere else
Same document, three very different price tags and wait times.
| Safety consultant | Template sellers | TailgateDocs | |
|---|---|---|---|
| Price | $500 to $2500 | $99 to $500 | $49 |
| Turnaround | 1 to 2 weeks | hours of DIY editing | Under 30 minutes |
| Site-specific to your project | Yes | No, you fill in blanks | Yes |
| Real 29 CFR citations | Yes | Sometimes outdated | Yes, verified against 140+ sections |
| Spanish version for your crew | Rarely | Almost never | Yes, +$19 |
| Revisions when the GC asks | Billed hourly | You edit it yourself | Free within 24h |
Common questions
▸How fast can I get a written safety program?
Under 30 minutes after you finish the questionnaire, and usually well inside that. It downloads in the browser and a copy lands in your email. If a document needs an extra compliance check it comes by email instead, and we tell you.
▸Does it cover the OSHA standards for electrical work?
Yes. Electrical documents are generated against a curated focus list including 1926.404(b), 1926.405, 1926.416 and more, and every citation is validated against a verified standards table before delivery.
▸What if the GC or prequal reviewer asks for changes?
Reply to your delivery email and we revise the document free, within 24 hours and as many times as it takes, until your GC or prequal reviewer accepts it.
Written Safety Program for other trades
RoofingHVAC / MechanicalGeneral ContractorLandscapingPlumbingConcrete / Masonry
Other documents
Site-Specific Safety Plan for Electrical ($49)Job Hazard Analysis for Electrical ($29)Heat Illness Prevention Plan for Electrical ($49)California Workplace Violence Prevention Plan for Electrical ($59)Sample documents
Free toolbox talks for your crew
Personal Fall Arrest Anchor SelectionFall Protection Rescue After a FallStepladders: The Hazards Nobody RespectsAsbestos Awareness in Older BuildingsAll talks (EN/ES)