Job Hazard Analysis for Landscaping Contractors
Task-by-task hazard breakdown, ready before the pre-job brief. Generated for landscaping contractors in under 30 minutes, every citation checked against our 29 CFR standards table, $29 flat. Delivered as a print-ready PDF, editable Word (.docx) available.
1,200+ documents generated · 350+ contractors served · Spanish version +$19
When you need this document
The GC wants a JHA (or AHA / JSA) for your task before work starts, or your safety program requires one per activity.
A completed JHA is the record that your crew broke the task into steps, matched each hazard to a control, and briefed the work before starting. It is what a GC pre-task-plan requirement asks for at the gate, and what an OSHA inspector looks for after a near miss to see whether the hazard was foreseen and controlled.
What's inside
- ✓ Task breakdown into work steps
- ✓ Hazards identified for every step
- ✓ Controls and safe work practices per hazard
- ✓ Required PPE and equipment checks
- ✓ Applicable safety standards, cited to the code that governs your state
- ✓ Crew review and sign-off block
Written for landscaping work, not a template
Every job hazard analysis we build for landscaping contractors is written around the hazards landscaping crews actually face: powered equipment / chainsaws, traffic exposure, chemical handling, heat exposure, shallow trenching. Here is the substance that goes into it.
Real landscaping jobs where a JHA matters
- ▸Clearing and grading a lot with a skid steer and loader while the ground crew rakes and plants inside the same swing radius.
- ▸Roadside median and right-of-way maintenance with crews on foot a few feet from live traffic, relying on flaggers and signage to keep them separated.
- ▸Removing a storm-damaged tree with a chainsaw and chipper, mixing fuel and running the saw overhead near power lines.
OSHA standards on the Landscaping focus list
The JHA is generated against these real 29 CFR sections for landscaping work, and every citation is validated against a verified standards table before delivery:
- §29 CFR 1926.602: material handling equipment (loaders, crawler and wheel tractors, and similar equipment)
- §29 CFR 1926.200: accident prevention signs and tags, including 1926.200(g)(2), under which all traffic control devices including signs, signals, markings and barricades must conform to Part 6 of the MUTCD
- §29 CFR 1926.201(a): signaling, including the use of flaggers and the warning garments flaggers wear, conforming to Part 6 of the MUTCD
- §29 CFR 1910.1200: hazard communication (fertilizers, pesticides, fuels)
- §29 CFR 1926.651: trenching for irrigation lines
- §29 CFR 1926.95, 1926.100, 1926.101, 1926.102: personal protective equipment (Subpart E). Cite the single section that matches the hazard; do not cite the range.
- §OSH Act 5(a)(1) General Duty Clause: heat illness prevention
What landscaping crews get cited for
The plan is written to close out the issues that draw citations in landscaping work:
- ⚠Hazard communication (29 CFR 1910.1200): no labels or safety data sheets for the fertilizers, pesticides, and fuels carried on the truck.
- ⚠Signaling and flaggers (29 CFR 1926.201(a)): roadside crews without the warning garments flaggers must wear, or without flagger placement conforming to Part 6 of the MUTCD.
- ⚠Traffic control devices (29 CFR 1926.200(g)): work zones without the signs, markings and barricades Part 6 of the MUTCD requires.
- ⚠Personal protective equipment (29 CFR 1926.95, 1926.100, 1926.102): missing eye, face, and head protection for chainsaw, mower, and trimmer operators.
What a job hazard analysis costs everywhere else
Same document, three very different price tags and wait times.
| Safety consultant | Template sellers | TailgateDocs | |
|---|---|---|---|
| Price | $500 to $2500 | $99 to $500 | $49 |
| Turnaround | 1 to 2 weeks | hours of DIY editing | Under 30 minutes |
| Site-specific to your project | Yes | No, you fill in blanks | Yes |
| Real 29 CFR citations | Yes | Sometimes outdated | Yes, verified against 140+ sections |
| Spanish version for your crew | Rarely | Almost never | Yes, +$19 |
| Revisions when the GC asks | Billed hourly | You edit it yourself | Free within 24h |
Common questions
▸How fast can I get a job hazard analysis?
Under 30 minutes after you finish the questionnaire, and usually well inside that. It downloads in the browser and a copy lands in your email. If a document needs an extra compliance check it comes by email instead, and we tell you.
▸Does it cover the OSHA standards for landscaping work?
Yes. Landscaping documents are generated against a curated focus list including 1926.602, 1926.200, 1926.201(a) and more, and every citation is validated against a verified standards table before delivery.
▸What if the GC or prequal reviewer asks for changes?
Reply to your delivery email and we revise the document free, within 24 hours and as many times as it takes, until your GC or prequal reviewer accepts it.
▸Can I get the JHA in Word (.docx)?
Yes. The document downloads instantly as a print-ready PDF, and you can add the editable Word (.docx) version for $19 at checkout or after delivery, so you can adjust it yourself later.
Job Hazard Analysis for other trades
RoofingElectricalHVAC / MechanicalGeneral ContractorPlumbingConcrete / Masonry
Free JHA resources
Free blank JHA template (Word & PDF)Filled JHA examplesHow to write a JHAThe JHA format, explained
Other documents
Site-Specific Safety Plan for Landscaping ($49)Written Safety Program for Landscaping ($149)Heat Illness Prevention Plan for Landscaping ($49)California Workplace Violence Prevention Plan for Landscaping ($59)Sample documents
Free toolbox talks for your crew
Hydraulic Pressure and Pinhole LeaksTire and Wheel Service on EquipmentEquipment Refueling and StaticMud Season and Site Vehicle RecoveryAll talks (EN/ES)