California Injury & Illness Prevention Program (IIPP) for General Contractor Contractors
The written IIPP every California employer must have. Yours, not a template. Generated for general contractor contractors in under 30 minutes, every citation checked against our state and federal standards table, $149 flat.
1,200+ documents generated · 350+ contractors served · Spanish version +$19
When you need this document
You employ anyone in California (an IIPP is mandatory for virtually every California employer), a Cal/OSHA inspector or GC asked for your IIPP, or a prequal portal wants it uploaded.
In a Cal/OSHA inspection the IIPP is usually the first document requested, and not having an effective written one is itself a citable violation under 8 CCR 3203. That is why the plan has to name your program administrator and describe your real inspection, investigation, correction, and training procedures, not just restate the regulation.
The regulations it is written to, applied to general contractor work
- §California: 8 CCR 3203 (Injury and Illness Prevention Program)
- §Plus the 29 CFR construction standards for your trade in the hazard sections
California requires both plans
Every California employer needs a written IIPP (8 CCR 3203) and a written workplace violence prevention plan (Labor Code section 6401.9). Labor Code 6401.9 lets the violence plan sit inside the IIPP or stand alongside it. They are separate documents and are priced separately.
Add the workplace violence prevention planWhat's inside
- ✓ All eight elements required by 8 CCR 3203
- ✓ Named program administrator and responsibilities
- ✓ Hazard identification and scheduled inspection procedures
- ✓ Accident and exposure investigation procedures
- ✓ Hazard correction tracking
- ✓ Training and instruction program for your trade
- ✓ Recordkeeping procedures
- ✓ Annual review and signature page
Written for general contractor work, not a template
Every california injury & illness prevention program (iipp) we build for general contractor contractors is written around the hazards general contractor crews actually face: multi-trade coordination, falls, struck-by from equipment, excavations, silica dust, housekeeping. Here is the substance that goes into it.
Real general contractor jobs where a IIPP matters
- ▸Running a multi-trade site where your framing crew, an electrical sub, and an excavation sub share the same footprint, and OSHA's multi-employer policy can put a controlling-employer citation on you for a sub's exposure.
- ▸An open utility trench deeper than 5 feet crosses the site and every trade has to cross or enter it, so it needs a protective system and a competent-person inspection each shift.
- ▸Concrete cutting and masonry work is throwing respirable silica that drifts into areas where other trades are working.
OSHA standards on the General Contractor focus list
The IIPP is generated against these real 29 CFR sections for general contractor work, and every citation is validated against a verified standards table before delivery:
- §29 CFR 1926.20: general safety and health provisions, including the accident prevention program and competent-person inspections
- §29 CFR 1926.21: safety training and education
- §29 CFR 1926.501-503: fall protection (Subpart M)
- §29 CFR 1926.451: scaffolds (Subpart L)
- §29 CFR 1926.1053: ladders (Subpart X)
- §29 CFR 1926.1153: respirable crystalline silica
- §29 CFR 1926.650-652: excavations (Subpart P)
- §29 CFR 1926.150-151: fire protection and prevention
- §29 CFR 1926.50-51: first aid and sanitation
What general contractor crews get cited for
The plan is written to close out the issues that draw citations in general contractor work:
- ⚠Fall protection, general requirements (29 CFR 1926.501): unprotected edges, floor openings, and leading edges across the site. As the controlling employer you can be cited for another trade's exposure, and this is OSHA's most-cited construction standard.
- ⚠Excavations (29 CFR 1926.652): trenches 5 feet or deeper with no sloping, benching, shoring, or trench box. The competent-person inspection before each shift is a separate duty under 29 CFR 1926.651(k).
- ⚠Respirable crystalline silica (29 CFR 1926.1153): no written exposure control plan for the cutting, coring, and grinding happening on site.
What a california injury & illness prevention program (iipp) costs everywhere else
Same document, three very different price tags and wait times.
| Safety consultant | Template sellers | TailgateDocs | |
|---|---|---|---|
| Price | $500 to $2500 | $99 to $500 | $49 |
| Turnaround | 1 to 2 weeks | hours of DIY editing | Under 30 minutes |
| Site-specific to your project | Yes | No, you fill in blanks | Yes |
| Real 29 CFR citations | Yes | Sometimes outdated | Yes, verified against 140+ sections |
| Spanish version for your crew | Rarely | Almost never | Yes, +$19 |
| Revisions when the GC asks | Billed hourly | You edit it yourself | Free within 24h |
Common questions
▸How fast can I get a california injury & illness prevention program (iipp)?
Under 30 minutes after you finish the questionnaire, and usually well inside that. It downloads in the browser and a copy lands in your email. If a document needs an extra compliance check it comes by email instead, and we tell you.
▸Which regulations does the IIPP cite?
California: 8 CCR 3203 (Injury and Illness Prevention Program); Plus the 29 CFR construction standards for your trade in the hazard sections. Every citation is validated against a verified regulations table before delivery, never written from memory.
▸What if the GC or prequal reviewer asks for changes?
Reply to your delivery email and we revise the document free, within 24 hours and as many times as it takes, until your GC or prequal reviewer accepts it.
California Injury & Illness Prevention Program (IIPP) for other trades
RoofingElectricalHVAC / MechanicalLandscapingPlumbingConcrete / Masonry
Other documents
Site-Specific Safety Plan for General Contractor ($49)Job Hazard Analysis for General Contractor ($29)Heat Illness Prevention Plan for General Contractor ($49)California Workplace Violence Prevention Plan for General Contractor ($59)Sample documents
Free toolbox talks for your crew
Welding Fume Exposure and VentilationArc Welding Electrical SafetyGrinding Wheel Inspection and the Ring TestPowder-Actuated Tool Certification and UseAll talks (EN/ES)